Label Dispensers

LABELMATE Label Dispensers are a quick and easy way to dispense individual labels. They use a Peel and Present design, meaning that as the material passes through the Dispenser the label is peeled away from the backing material and presented at the front of the unit just waiting to be picked off by the operator. With several different models to choose from these universal Label Dispensers can handle any job you may have for them.

LD-100-S Label Dispensers are designed for very small, delicate or odd shaped labels. This S model has a Foot Switch design and Speed Adjustment Knob for the ultimate Dispensing control. Once the label is peeled away from the backing material it is gently placed back on the backing material waiting to be carefully picked up by an operator.

LD-RS Label Dispensers are designed for dispensing standard label material. With an adjustable Label Sensor and Speed Adjustment Switch you can adjust the amount of label that is dispensed as well as the speed in which it is dispensed. SS “Stainless-Steel” models are designed for clean room environments. With a completely sealed chassis these units can be placed in any indoor dry environment.

LD-T Label Dispensers are designed for clear, transparent labels. With an adjustable Label Sensor and Speed Adjustment Switch you can adjust the amount of label that is dispensed as well as the speed in which it is dispensed. The Label Sensor Adjustment allows you to be able to adjust the sensitivity of the Label Sensor for universal label sensing of many different types of material.

With an unmatched 3-Year Parts and Labor Limited Warranty, all LABELMATE USA Dispensers are designed for worry-free 24/7 operation.

LABELMATE USA Dispensers are easy to set up and silent in operation.

SENSOR-OPB

Thumbnail image for SENSOR-OPB

Replacement Optional Sensor Assembly for ALL LD-T models.

Print Friendly
Share
Read More →

PCB-ASSY-LD-T

Thumbnail image for PCB-ASSY-LD-T

Replacement Printed Circuit Board Assembly for ALL LD-T models.

Print Friendly
Share
Read More →

PCB-ASSY-LD-RS

Thumbnail image for PCB-ASSY-LD-RS

Replacement Printed Circuit Board Assembly for ALL LD-RS models.

Print Friendly
Share
Read More →

BAIL-LD-200

Thumbnail image for BAIL-LD-200

6.5” Replacement Bail for ALL LD-200 models.

Print Friendly
Share
Read More →

BAIL-LD-100

Thumbnail image for BAIL-LD-100

4.5” Replacement Bail for ALL LD-100 models.

Print Friendly
Share
Read More →

MGT-1240P

Thumbnail image for MGT-1240P

Replacement Power Supply for all Label Dispenser models.

Print Friendly
Share
Read More →

LD-ES

Optional External Start feature allows for an outside command signal to be sent to the Dispenser to tell it when to dispense the next label. When device is not present Label Dispenser functions like normal. Factory Installed Option.

Print Friendly
Share
Read More →

LRB-12

Thumbnail image for LRB-12

Optional Large Label Roll Extender takes an 8.5” roll diameter to a 12” roll diameter in seconds. Easy to install and comes with all hardware needed to make the upgrade. Not available on any LD-200 model or -SS Stainless Steel models.

Print Friendly
Share
Read More →

LDC-1

Thumbnail image for LDC-1

Optional Label Dispenser Counter provides an accurate count of labels that have been dispensed. Factory Installed Option. Not available on the LD-100-S model or the -SS Stainless Steel models.

Print Friendly
Share
Read More →

FLANGES-LD

Thumbnail image for FLANGES-LD

Optional Label Flanges provide tension on the label supply roll for easier peeling of labels from their backing material. Ideal option for hard to peel and super sticky labels. Sold in sets of 2.

Print Friendly
Share
Read More →

LD-200-T

Thumbnail image for LD-200-T

6.5” wide Transparent Label Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label. Label Width – 6.5” (165-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-100-T

Thumbnail image for LD-100-T

4.5” wide Transparent Label Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label. Label Width – 4.5” (114-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-200-RS-SS

Thumbnail image for LD-200-RS-SS

6.5” wide Reflective Sensor Label Dispenser with Stainless Steel chassis. Peel and Present operation allows for easy manual removal of label. Label Width – 6.5” (165-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-200-RS

Thumbnail image for LD-200-RS

6.5” wide Reflective Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label. Label Width – 6.5” (165-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-100-RS-SS

Thumbnail image for LD-100-RS-SS

4.5” wide Reflective Sensor Label Dispenser with Stainless Steel chassis. Peel and Present operation allows for easy manual removal of label. Label Width – 4.5” (114-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-100-RS

Thumbnail image for LD-100-RS

4.5” wide Reflective Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label. Label Width – 4.5” (114-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →

LD-100S

Thumbnail image for LD-100S

4.5” wide Foot Switch operated Label Dispenser with speed adjustment knob. Ideal for very small or delicate labels. Label Width – 4.5” (114-mm) Roll Diameter – 8.6” (220-mm)

Print Friendly
Share
Read More →