Products

Toshiba DB-EA4D

Thumbnail image for Toshiba DB-EA4D

The compact, rugged and robust DB-EA4D double-sided label printer has been designed to offer a low-cost and green solution for applications requiring dual output. With user-friendly operation and high-speed printing, this innovative technology provides a reliable and efficient alternative to traditional single-sided solutions.

Share
Print Friendly, PDF & Email
Share
Read More →

Toshiba B-EX4D2 (Thermal)

Thumbnail image for Toshiba B-EX4D2 (Thermal)

Industrial 4? Direct Thermal Label Printer (no ribbon) – Tailored for Transport and Logistics Fast Printing Speed: 12 ips Low Cost of Operation Designed for Scalability and Flexibility Low Maintenance ZPL II Emulation USB & LAN interface as standard 100km Expected Printhead Life Rugged Metal Construction Energy Star Certified      

Share
Print Friendly, PDF & Email
Share
Read More →

Toshiba B-EX4T2

Thumbnail image for Toshiba B-EX4T2

Toshiba B-EX4T2 printing solutions feature high quality and economical industrial products which deliver low running costs and total costs of ownership. They are ideally suited to “no-nonsense” replacement of competitor estates and are available in a variety of resolutions for the most diverse industrial printing applications.  

Share
Print Friendly, PDF & Email
Share
Read More →

Epson TM-C3500

Thumbnail image for Epson TM-C3500

Colour Label Printers Fast, Full Colour, On-demand Colour Inkjet Label Printer    

Share
Print Friendly, PDF & Email
Share
Read More →

B-eX4t1

Thumbnail image for B-eX4t1

A One-Stop Solution Toshiba can offer a total solution including a full range of approved media, labels, consumables and cleaning products.A support network in the majority of countries provides essential peace of mind that – once installed – the printers will be serviced and maintained by experienced engineers and service staff. Green Credentials Toshiba is […]

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-40-CHUCK

Thumbnail image for UCAT-40-CHUCK

6” wide Powered Label Unwinder, with 16” roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 6” (152-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-40-CHUCK-220

Thumbnail image for UCAT-40-CHUCK-220

8.6” wide Powered Label Unwinder, with 16” roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 8.6” (220-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-40-CHUCK-10

Thumbnail image for UCAT-40-CHUCK-10

10” wide Powered Label Unwinder, with 16” roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 10” (254-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-1-R16-CHUCK-220

Thumbnail image for UCAT-1-R16-CHUCK-220

8.6” wide Non-Powered Label Unwinder with 16” roll capacity and Inner Label Flange. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 8.6” (220-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

PM-300

Thumbnail image for PM-300

Reel-To-Reel “OFF-LINE” Print Mechanism Label Transport unit. 11” wide roll capacity, 3” to 3” core. Core Diameter – 3” Unwind to 3” Rewind Label Width – Up to 6” (152-mm) Roll Diameter – Up to 11.5” (290-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

Quick-Chucks

Thumbnail image for Quick-Chucks

C1.5-170 6” wide 1.5” core Quick-Chuck Shaft. C1.5-270 10” wide 1.5” core Quick-Chuck Shaft. C40-170 6” wide 40-mm core Quick-Chuck Shaft. C70-170 6” wide 70-mm core Quick-Chuck Shaft. C76-170 6” wide 3” core Quick-Chuck Shaft. C76-220 8.6” wide 3” core Quick-Chuck Shaft. C76-270 10.6” wide 3” core Quick-Chuck Shaft. C100-170 6” wide 4” core Quick-Chuck […]

Share
Print Friendly, PDF & Email
Share
Read More →

Toshiba SX600

Thumbnail image for Toshiba SX600

The Best Just Gets Better For dependable top quality labels with small high-density and 2-dimensional barcodes and high quality graphics, trust Toshiba to deliver. Using an innovative microstep drive control system, the 600dpi printhead can actually print up to 1200dpi on the Y axis, by far the highest for any thermal printer on the market. […]

Share
Print Friendly, PDF & Email
Share
Read More →

PS-70

Thumbnail image for PS-70

Replacement Power Supply for ALL UCAT-40 models.

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-ACH

Thumbnail image for UCAT-2-ACH

6” wide 1” to 4″ Adjustable Core Holder Unwind Shaft. Core Diameter – 1” to 4” Label Width – 6” (152-mm) Roll Diameter – 11” (280-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G

Thumbnail image for CAT-40G

6” wide Gear Driven Label Rewinder with 16” roll capacity and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 6” (152-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

RRR-250

Thumbnail image for RRR-250

Reel-To-Reel Unwind/Rewind Station. 10″ wide roll capacity, 3” to 3” core. Core Diameter – 3” Unwind to 3” Rewind Label Width – Up to 6” (152-mm) Roll Diameter – Up to 10” (254-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2P-CORELESS

Thumbnail image for CAT-2P-CORELESS

Coreless Rewind Shaft, with 2 label Flanges and rewind Bail. Core Diameter – Coreless Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

MC-10A

Thumbnail image for MC-10A

3” Core or Coreless Rewind Shaft with Inner Flange and Bail. Core Diameter – 3” or Coreless Label Width – Up to 4.5” (114-mm) Roll Diameter – Up to 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SLIT-100-ECONOMY

Thumbnail image for SLIT-100-ECONOMY

6” wide complete standard “OFF-LINE” Slitting Package. S-100 label Slitter with 2 Slitting Blades. CAT-2-CHUCK Shaft Rewinder. UCAT-1-STANDARD Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8” OD. 2 Plastic Separator Plates. 8” OD

Share
Print Friendly, PDF & Email
Share
Read More →

S-100

Thumbnail image for S-100

6” wide Stand Alone label Slitter with 2 Slitting Blades. Label Width – 6” (152-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-STANDARD

Thumbnail image for UCAT-2-STANDARD

6” wide Standard Unwind Shaft, with Inner Label Flange. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G-220

Thumbnail image for CAT-40G-220

8.6” wide Gear Driven Label Rewinder with 16” roll capacity and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 8.6” (220-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

RRR-330

Thumbnail image for RRR-330

Reel-To-Reel Unwind/Rewind Station. 13″ wide roll capacity, 3” to 3” core. Core Diameter – 3” Unwind to 3” Rewind Label Width – Up to 6” (152-mm) Roll Diameter – Up to 13” (330-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2P-1-INCH

Thumbnail image for CAT-2P-1-INCH

1” Core Rewind Shaft, with 2 label Flanges. Core Diameter – 1” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

MC-11

Thumbnail image for MC-11

1-4” Core Adjustable Rewind Shaft with Inner Flange. Core Diameter – 1-4” or Coreless Label Width – Up to 4.5” (114-mm) Roll Diameter – Up to 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SLIT-100-DELUXE

Thumbnail image for SLIT-100-DELUXE

6” wide complete Heavy-Duty “OFF-LINE” Slitting Package. S-100 Label Slitter with 2 Slitting Blades. CAT-2-CHUCK-HTO Shaft Rewinder. CAT-2-STANDARD Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8” OD. 2 Plastic Separator Plates. 8” OD

Share
Print Friendly, PDF & Email
Share
Read More →

S-200

Thumbnail image for S-200

10” wide Stand Alone label Slitter with 3 Slitting Blades. Label Width – 10” (254-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-CHUCK

Thumbnail image for UCAT-2-CHUCK

6″ wide “Quick-Chuck” Unwind Shaft, with Inner Label Flange. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G-10

Thumbnail image for CAT-40G-10

10” wide Gear Driven Label Rewinder with 16” roll capacity and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 10” (254-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

RRR-330-A

Thumbnail image for RRR-330-A

Reel-To-Reel Unwind/Rewind Station. 13″ wide roll capacity, 3” to 1”- 4” core with Adjustable Core Holder. Core Diameter – 3” Unwind to 1-4” Rewind Label Width – Up to 6” (152-mm) Roll Diameter – Up to 13” (330-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2P-ACH

Thumbnail image for CAT-2P-ACH

1” to 4’ Adjustable Core Holder Rewind Shaft. Core Diameter – 1” to 4” Label Width – 6” (152-mm) Roll Diameter – 11” (280-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G-SA

Thumbnail image for CAT-40G-SA

6” wide Gear Driven Label Rewinder with 16” roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 6” (152-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

APG-MC

Thumbnail image for APG-MC

Optional APG , Adjustable Paper Guide for MC-11 or the MC-10A. Helps guide the outer edge of the label material for even roll edge.

Share
Print Friendly, PDF & Email
Share
Read More →

SLIT-200-ECONOMY

Thumbnail image for SLIT-200-ECONOMY

10” wide complete standard “OFF-LINE” Slitting Package. S-200 Label Slitter with 3 Slitting Blades. CAT-2-CHUCK10 Shaft Rewinder. UCAT-1-W10 Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8” OD. 3 Plastic Separator Plates. 8” OD

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-CHUCK-220

Thumbnail image for UCAT-2-CHUCK-220

8.6” wide “Quick-Chuck” Unwind Shaft, with Inner Label Flange. Core Diameter – 3” Label Width – 8.6” (220-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G-SA-220

Thumbnail image for CAT-40G-SA-220

8.6” wide Gear Driven Label Rewinder with 16” roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 8.6” (220-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

RR-1”U

Thumbnail image for RR-1”U

Optional 1” Unwind shaft for ALL RRR models. Change from a 3” Unwind Shaft to a 1” Unwind Shaft in minutes.

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGE-MC

Thumbnail image for FLANGE-MC

Optional Outer Flange for MC-10A only. Helps guide the outer edge of the label material for an even roll edge.

Share
Print Friendly, PDF & Email
Share
Read More →

SLIT-200-DELUXE

Thumbnail image for SLIT-200-DELUXE

10” wide complete Heavy-Duty “OFF-LINE” Slitting Package. S-200 Label Slitter with 3 Slitting Blades. CAT-2-CHUCK10-HTO Shaft Rewinder. CAT-2-W10 Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8” OD. 3 Plastic Separator Plates. 8” OD

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-W10

Thumbnail image for UCAT-2-W10

10” wide Standard Unwind Shaft, with Inner Label Flange. Core Diameter – 3” Label Width – 10” (254-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-40G-SA-10

Thumbnail image for CAT-40G-SA-10

10” wide Gear Driven Label Rewinder with 16” roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 10” (254-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

RR-1.5”U

Thumbnail image for RR-1.5”U

Optional 1.5” Unwind shaft for ALL RRR models. Change from a 3” Unwind Shaft to a 1.5” Unwind Shaft in minutes.

Share
Print Friendly, PDF & Email
Share
Read More →

MW97

Thumbnail image for MW97

Replacement Power Supply for ALL MC-10A and MC-11 Label Rewinders.

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-2-CHUCK-10

Thumbnail image for UCAT-2-CHUCK-10

10” wide “Quick-Chuck” Unwind Shaft, with Inner Label Flange. Core Diameter – 3” Label Width – 10” (254-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

PS-100

Thumbnail image for PS-100

Replacement Power Supply for ALL CAT-40G models.

Share
Print Friendly, PDF & Email
Share
Read More →

FIN SET, 31mm

Thumbnail image for FIN SET, 31mm

Replacement 3” Core adapters for the MC-10A Allows for 3” Core Rewinding on the MC-10A. Set of 3 with hardware.

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGE-CAT-OUTER

Thumbnail image for FLANGE-CAT-OUTER

Optional Outer Flange for Standard Shaft UCAT-2 models.

Share
Print Friendly, PDF & Email
Share
Read More →

PCB-ASSY-CAT-40G

Thumbnail image for PCB-ASSY-CAT-40G

Replacement Printed Circuit Board for ALL CAT-40G models.

Share
Print Friendly, PDF & Email
Share
Read More →

BAIL-MC

Thumbnail image for BAIL-MC

Replacement Bail for the MC-10A. Allows for Coreless Rewinding on the MC-10A Serial number required for purchase of this item.

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGE-QC-12-OUTER

Thumbnail image for FLANGE-QC-12-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-2 models.

Share
Print Friendly, PDF & Email
Share
Read More →

APG-CAT

Thumbnail image for APG-CAT

Optional APG, Adjustable Paper Guide. Helps guide the outer edge of the label material for an even roll.

Share
Print Friendly, PDF & Email
Share
Read More →

TWIN-CAT-2

Thumbnail image for TWIN-CAT-2

Dual Spindle label Rewind / Unwind Station.

Share
Print Friendly, PDF & Email
Share
Read More →

SHAFT, TC-CL

Coreless Rewind Shaft, with 2 Label Flanges and Rewind Bail. Core Diameter – Coreless Label Width – 6” (152-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SHAFT, TC-1”

1” Rewind Shaft, with 2 Label Flanges. Core Diameter – 1” Label Width – 6” (152-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGE-R16-OUTER

Thumbnail image for FLANGE-R16-OUTER

Optional Outer Flange for Standard Shaft UCAT-16 models.

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGE-QC-R16-OUTER

Thumbnail image for FLANGE-QC-R16-OUTER

Optional Outer Flange for “Quick-Chuck” Shaft UCAT-40 models.

Share
Print Friendly, PDF & Email
Share
Read More →

SHAFT, TC-W6

6” wide Standard Rewind Shaft, with 2 Label Flanges. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SHAFT, TC-W10

10” wide Standard Rewind Shaft, with 2 Label Flanges. Core Diameter – 3’ Label Width – 10” (254-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C1.5-170

Thumbnail image for TC-C1.5-170

6” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 1.5” Label Width – 6.7” (170-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SENSOR-OPB

Thumbnail image for SENSOR-OPB

Replacement Optional Sensor Assembly for ALL LD-T models.

Share
Print Friendly, PDF & Email
Share
Read More →

ACH-TC2

Thumbnail image for ACH-TC2

1” to 4” Adjustable Core Holder Shaft. Core Diameter – 1” to 4” Label Width – 6” (152-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – CORELESS

Thumbnail image for CAT-2 – CORELESS

Coreless Rewind Shaft with Inner Flange and Rewind Bail. Core Dia. – none Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

PCB-ASSY-LD-T

Thumbnail image for PCB-ASSY-LD-T

Replacement Printed Circuit Board Assembly for ALL LD-T models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C1.5-270

Thumbnail image for TC-C1.5-270

10” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 1.5” Label Width – 10.6” (270-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – 1 INCH

Thumbnail image for CAT-2 – 1 INCH

1″ Dia. Rewind Shaft and two Label Flanges. Core Dia. – 1″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

PCB-ASSY-LD-RS

Thumbnail image for PCB-ASSY-LD-RS

Replacement Printed Circuit Board Assembly for ALL LD-RS models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C40-170

Thumbnail image for TC-C40-170

6” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 40mm Label Width – 6.7” (170-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – ACH

Thumbnail image for CAT-2 – ACH

1″ to 4″ Adjustable Core Holder Core Dia. – 1″ to 4″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 11″ (280 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

PC-1

Thumbnail image for PC-1

Optional Label Counter. Count labels as the pass through the Slitter. Factory Installed Option.

Share
Print Friendly, PDF & Email
Share
Read More →

BAIL-LD-200

Thumbnail image for BAIL-LD-200

6.5” Replacement Bail for ALL LD-200 models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C70-170

Thumbnail image for TC-C70-170

6” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 70mm Label Width – 6.7” (170-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2-STANDARD

Thumbnail image for CAT-2-STANDARD

6″ wide Fin Style Core Holder and two Label Flanges. Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

BH-1

Thumbnail image for BH-1

Optional Blade Holder Assembly. Add an additional Slitting blade to your Slitter in minutes.

Share
Print Friendly, PDF & Email
Share
Read More →

BAIL-LD-100

Thumbnail image for BAIL-LD-100

4.5” Replacement Bail for ALL LD-100 models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C76-170

Thumbnail image for TC-C76-170

6” wide “Quick-Chuck” Shaft, with 2 Label Flanges. Core Diameter – 3” Label Width – 6.7” (170-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2L-1-INCH

Thumbnail image for CAT-2L-1-INCH

1” Core Rewind Shaft with 2 Label Flanges. Core Diameter – 1” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – CHUCK

Thumbnail image for CAT-2 – CHUCK

6″ wide”Quick-Chuck” and two Label Flanges. Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

Locking Bar

Thumbnail image for Locking Bar

Optional Locking Bar allows you to lock the units together for perfect slitting alignment.

Share
Print Friendly, PDF & Email
Share
Read More →

MGT-1240P

Thumbnail image for MGT-1240P

Replacement Power Supply for all Label Dispenser models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C76-220

Thumbnail image for TC-C76-220

8.6” wide “Quick-Chuck” Shaft, with 2 Label Flanges. Core Diameter – 3” Label Width – 8.6” (220-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2L-ACH

Thumbnail image for CAT-2L-ACH

1” to 4’ Adjustable Core Holder Rewind Shaft. Core Diameter – 1” to 4” Label Width – 6” (152-mm) Roll Diameter – 11” (280-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – R16-CHUCK

Thumbnail image for CAT-2 – R16-CHUCK

6″ wide”Quick-Chuck”and two Label Flanges. Includes the High-Torque Option. (see below)* Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 16″ (400 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

HSB-10

Thumbnail image for HSB-10

Optional Replacement Slitting Blades. Pack of 10 Blades.

Share
Print Friendly, PDF & Email
Share
Read More →

LD-ES

Optional External Start feature allows for an outside command signal to be sent to the Dispenser to tell it when to dispense the next label. When device is not present Label Dispenser functions like normal. Factory Installed Option.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C76-270

Thumbnail image for TC-C76-270

10” wide “Quick-Chuck” Shaft, with 2 Label Flanges. Core Diameter – 3” Label Width – 10.6” (270-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2L-STANDARD

Thumbnail image for CAT-2L-STANDARD

6” wide Standard Rewind Shaft with 2 Label Flanges. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – CHUCK-220

Thumbnail image for CAT-2 – CHUCK-220

8.6″ wide”Quick-Chuck” and two Label Flanges.* Core Dia. – 3″ Label Width – Up to 8.6″ (220 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

LRB-12

Thumbnail image for LRB-12

Optional Large Label Roll Extender takes an 8.5” roll diameter to a 12” roll diameter in seconds. Easy to install and comes with all hardware needed to make the upgrade. Not available on any LD-200 model or -SS Stainless Steel models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C100-170

Thumbnail image for TC-C100-170

6” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 4” Label Width – 6.7” (170-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2L-CHUCK

Thumbnail image for CAT-2L-CHUCK

6” wide “Quick-Chuck” Rewind Shaft with 2 Label Flanges. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 12” (305-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – R16-CHUCK-220

Thumbnail image for CAT-2 – R16-CHUCK-220

8.6″ wide”Quick-Chuck” and two Label Flanges. Includes the High-Torque Option. (see below)* Core Dia. – 3″ Label Width – Up to 8.6″ (220 mm) Roll Dia. – Up to 16″ (400 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SP-25-220AL

Thumbnail image for SP-25-220AL

1” Core 8.6” Diameter, Aluminum Separator Plate.

Share
Print Friendly, PDF & Email
Share
Read More →

LDC-1

Thumbnail image for LDC-1

Optional Label Dispenser Counter provides an accurate count of labels that have been dispensed. Factory Installed Option. Not available on the LD-100-S model or the -SS Stainless Steel models.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C100-220

Thumbnail image for TC-C100-220

8.6” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 4” Label Width – 8.6” (220-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2L-R16-CHUCK

Thumbnail image for CAT-2L-R16-CHUCK

6” wide “Quick-Chuck” Rewind Shaft with 2 Label Flanges and 16’ Roll Diameter. Core Diameter – 3” Label Width – 6” (152-mm) Roll Diameter – 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

CAT-2 – W10

Thumbnail image for CAT-2 – W10

10″ wide Fin Style Core Holder and two Label Flanges. Core Dia. – 3″ Label Width – Up to 10″ (254 mm) Roll Dia. – Up to 12″ (305 mm)

Share
Print Friendly, PDF & Email
Share
Read More →

UCAT-1-R16-CHUCK

Thumbnail image for UCAT-1-R16-CHUCK

6” wide Non-Powered Label Unwinder with 16” roll capacity and Inner Label Flange. Core Diameter – 3” “Quick-Chuck” Label Width – Up to 6” (152-mm) Roll Diameter – Up to 16” (400-mm)

Share
Print Friendly, PDF & Email
Share
Read More →

SP-38-220AL

Thumbnail image for SP-38-220AL

1.5” Core 8.6” Diameter, Aluminum Separator Plate.

Share
Print Friendly, PDF & Email
Share
Read More →

FLANGES-LD

Thumbnail image for FLANGES-LD

Optional Label Flanges provide tension on the label supply roll for easier peeling of labels from their backing material. Ideal option for hard to peel and super sticky labels. Sold in sets of 2.

Share
Print Friendly, PDF & Email
Share
Read More →

TC-C100-270

Thumbnail image for TC-C100-270

10” wide “Quick-Chuck” Shaft, with Inner Flange. Core Diameter – 4” Label Width – 10.6” (270-mm) Roll Diameter – 8.6” (220-mm)

Share
Print Friendly, PDF & Email
Share
Read More →