LabelMate

UCAT-40-CHUCK

6� wide Powered Label Unwinder, with 16� roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 6� (152-mm) Roll Diameter – Up to 16� (400-mm)

8.6� wide Powered Label Unwinder, with 16� roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 8.6� (220-mm) Roll Diameter – Up to 16� (400-mm)

10� wide Powered Label Unwinder, with 16� roll capacity, Sensor Arm and Inner Label Flange. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 10� (254-mm) Roll Diameter – Up to 16� (400-mm)

8.6� wide Non-Powered Label Unwinder with 16� roll capacity and Inner Label Flange. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 8.6� (220-mm) Roll Diameter – Up to 16� (400-mm)

Reel-To-Reel “OFF-LINE” Print Mechanism Label Transport unit. 11� wide roll capacity, 3� to 3� core. Core Diameter – 3� Unwind to 3� Rewind Label Width – Up to 6� (152-mm) Roll Diameter – Up to 11.5� (290-mm)

C1.5-170 6� wide 1.5� core Quick-Chuck Shaft. C1.5-270 10� wide 1.5� core Quick-Chuck Shaft. C40-170 6� wide 40-mm core Quick-Chuck Shaft. C70-170 6� wide 70-mm core Quick-Chuck Shaft. C76-170 6� wide 3� core Quick-Chuck Shaft. C76-220 8.6� wide 3� core Quick-Chuck Shaft. C76-270 10.6� wide 3� core Quick-Chuck Shaft. C100-170 6� wide 4� core Quick-Chuck […]

Replacement Power Supply for ALL UCAT-40 models.

6� wide 1� to 4″ Adjustable Core Holder Unwind Shaft. Core Diameter – 1� to 4� Label Width – 6� (152-mm) Roll Diameter – 11� (280-mm)

6� wide Gear Driven Label Rewinder with 16� roll capacity and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 6� (152-mm) Roll Diameter – Up to 16� (400-mm)

Reel-To-Reel Unwind/Rewind Station. 10″ wide roll capacity, 3� to 3� core. Core Diameter – 3� Unwind to 3� Rewind Label Width – Up to 6� (152-mm) Roll Diameter – Up to 10� (254-mm)

Coreless Rewind Shaft, with 2 label Flanges and rewind Bail. Core Diameter – Coreless Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

3� Core or Coreless Rewind Shaft with Inner Flange and Bail. Core Diameter – 3� or Coreless Label Width – Up to 4.5� (114-mm) Roll Diameter – Up to 8.6� (220-mm)

6� wide complete standard �OFF-LINE� Slitting Package. S-100 label Slitter with 2 Slitting Blades. CAT-2-CHUCK Shaft Rewinder. UCAT-1-STANDARD Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8� OD. 2 Plastic Separator Plates. 8� OD

6� wide Stand Alone label Slitter with 2 Slitting Blades. Label Width – 6� (152-mm)

6� wide Standard Unwind Shaft, with Inner Label Flange. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

8.6� wide Gear Driven Label Rewinder with 16� roll capacity and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 8.6� (220-mm) Roll Diameter – Up to 16� (400-mm)

Reel-To-Reel Unwind/Rewind Station. 13″ wide roll capacity, 3� to 3� core. Core Diameter – 3� Unwind to 3� Rewind Label Width – Up to 6� (152-mm) Roll Diameter – Up to 13� (330-mm)

1� Core Rewind Shaft, with 2 label Flanges. Core Diameter – 1� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

1-4� Core Adjustable Rewind Shaft with Inner Flange. Core Diameter – 1-4� or Coreless Label Width – Up to 4.5� (114-mm) Roll Diameter – Up to 8.6� (220-mm)

6� wide complete Heavy-Duty �OFF-LINE� Slitting Package. S-100 Label Slitter with 2 Slitting Blades. CAT-2-CHUCK-HTO Shaft Rewinder. CAT-2-STANDARD Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8� OD. 2 Plastic Separator Plates. 8� OD

10� wide Stand Alone label Slitter with 3 Slitting Blades. Label Width – 10� (254-mm)

6″ wide �Quick-Chuck� Unwind Shaft, with Inner Label Flange. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

10� wide Gear Driven Label Rewinder with 16� roll capacity and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 10� (254-mm) Roll Diameter – Up to 16� (400-mm)

Reel-To-Reel Unwind/Rewind Station. 13″ wide roll capacity, 3� to 1�- 4� core with Adjustable Core Holder. Core Diameter – 3� Unwind to 1-4� Rewind Label Width – Up to 6� (152-mm) Roll Diameter – Up to 13� (330-mm)

1� to 4� Adjustable Core Holder Rewind Shaft. Core Diameter – 1� to 4� Label Width – 6� (152-mm) Roll Diameter – 11� (280-mm)

6� wide Gear Driven Label Rewinder with 16� roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 6� (152-mm) Roll Diameter – Up to 16� (400-mm)

Optional APG , Adjustable Paper Guide for MC-11 or the MC-10A. Helps guide the outer edge of the label material for even roll edge.

10� wide complete standard �OFF-LINE� Slitting Package. S-200 Label Slitter with 3 Slitting Blades. CAT-2-CHUCK10 Shaft Rewinder. UCAT-1-W10 Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8� OD. 3 Plastic Separator Plates. 8� OD

8.6� wide �Quick-Chuck� Unwind Shaft, with Inner Label Flange. Core Diameter – 3� Label Width – 8.6� (220-mm) Roll Diameter – 12� (305-mm)

8.6� wide Gear Driven Label Rewinder with 16� roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 8.6� (220-mm) Roll Diameter – Up to 16� (400-mm)

Optional 1� Unwind shaft for ALL RRR models. Change from a 3� Unwind Shaft to a 1� Unwind Shaft in minutes.

Optional Outer Flange for MC-10A only. Helps guide the outer edge of the label material for an even roll edge.

10� wide complete Heavy-Duty �OFF-LINE� Slitting Package. S-200 Label Slitter with 3 Slitting Blades. CAT-2-CHUCK10-HTO Shaft Rewinder. CAT-2-W10 Shaft Unwinder. Locking Bar, Locks the 3 units together. HSB-10, 10-Pack Replacement Blades. 2 Aluminum Separator Plates. 8� OD. 3 Plastic Separator Plates. 8� OD

10� wide Standard Unwind Shaft, with Inner Label Flange. Core Diameter – 3� Label Width – 10� (254-mm) Roll Diameter – 12� (305-mm)

10� wide Gear Driven Label Rewinder with 16� roll capacity, Sensor Arm and 2 Label Flanges. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 10� (254-mm) Roll Diameter – Up to 16� (400-mm)

Optional 1.5� Unwind shaft for ALL RRR models. Change from a 3� Unwind Shaft to a 1.5� Unwind Shaft in minutes.

Replacement Power Supply for ALL MC-10A and MC-11 Label Rewinders.

10� wide �Quick-Chuck� Unwind Shaft, with Inner Label Flange. Core Diameter – 3� Label Width – 10� (254-mm) Roll Diameter – 12� (305-mm)

Replacement Power Supply for ALL CAT-40G models.

Replacement 3� Core adapters for the MC-10A Allows for 3� Core Rewinding on the MC-10A. Set of 3 with hardware.

Optional Outer Flange for Standard Shaft UCAT-2 models.

Replacement Printed Circuit Board for ALL CAT-40G models.

Replacement Bail for the MC-10A. Allows for Coreless Rewinding on the MC-10A Serial number required for purchase of this item.

Optional Outer Flange for �Quick-Chuck� Shaft UCAT-2 models.

Optional APG, Adjustable Paper Guide. Helps guide the outer edge of the label material for an even roll.

Dual Spindle label Rewind / Unwind Station.

SHAFT, TC-CL

Coreless Rewind Shaft, with 2 Label Flanges and Rewind Bail. Core Diameter – Coreless Label Width – 6� (152-mm) Roll Diameter – 8.6� (220-mm)

SHAFT, TC-1�

1� Rewind Shaft, with 2 Label Flanges. Core Diameter – 1� Label Width – 6� (152-mm) Roll Diameter – 8.6� (220-mm)

Optional Outer Flange for Standard Shaft UCAT-16 models.

Optional Outer Flange for �Quick-Chuck� Shaft UCAT-40 models.

SHAFT, TC-W6

6� wide Standard Rewind Shaft, with 2 Label Flanges. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 8.6� (220-mm)

SHAFT, TC-W10

10� wide Standard Rewind Shaft, with 2 Label Flanges. Core Diameter – 3� Label Width – 10� (254-mm) Roll Diameter – 8.6� (220-mm)

6� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 1.5� Label Width – 6.7� (170-mm) Roll Diameter – 8.6� (220-mm)

Replacement Optional Sensor Assembly for ALL LD-T models.

1� to 4� Adjustable Core Holder Shaft. Core Diameter – 1� to 4� Label Width – 6� (152-mm) Roll Diameter – 8.6� (220-mm)

Coreless Rewind Shaft with Inner Flange and Rewind Bail. Core Dia. – none Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Replacement Printed Circuit Board Assembly for ALL LD-T models.

10� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 1.5� Label Width – 10.6� (270-mm) Roll Diameter – 8.6� (220-mm)

1″ Dia. Rewind Shaft and two Label Flanges. Core Dia. – 1″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Replacement Printed Circuit Board Assembly for ALL LD-RS models.

6� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 40mm Label Width – 6.7� (170-mm) Roll Diameter – 8.6� (220-mm)

1″ to 4″ Adjustable Core Holder Core Dia. – 1″ to 4″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 11″ (280 mm)

Optional Label Counter. Count labels as the pass through the Slitter. Factory Installed Option.

6.5� Replacement Bail for ALL LD-200 models.

6� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 70mm Label Width – 6.7� (170-mm) Roll Diameter – 8.6� (220-mm)

6″ wide Fin Style Core Holder and two Label Flanges. Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Optional Blade Holder Assembly. Add an additional Slitting blade to your Slitter in minutes.

4.5� Replacement Bail for ALL LD-100 models.

6� wide �Quick-Chuck� Shaft, with 2 Label Flanges. Core Diameter – 3� Label Width – 6.7� (170-mm) Roll Diameter – 8.6� (220-mm)

1� Core Rewind Shaft with 2 Label Flanges. Core Diameter – 1� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

6″ wide”Quick-Chuck” and two Label Flanges. Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 12″ (305 mm)

Optional Locking Bar allows you to lock the units together for perfect slitting alignment.

Replacement Power Supply for all Label Dispenser models.

8.6� wide �Quick-Chuck� Shaft, with 2 Label Flanges. Core Diameter – 3� Label Width – 8.6� (220-mm) Roll Diameter – 8.6� (220-mm)

1� to 4� Adjustable Core Holder Rewind Shaft. Core Diameter – 1� to 4� Label Width – 6� (152-mm) Roll Diameter – 11� (280-mm)

6″ wide”Quick-Chuck”and two Label Flanges. Includes the High-Torque Option. (see below)* Core Dia. – 3″ Label Width – Up to 6″ (152 mm) Roll Dia. – Up to 16″ (400 mm)

Optional Replacement Slitting Blades. Pack of 10 Blades.

LD-ES

Optional External Start feature allows for an outside command signal to be sent to the Dispenser to tell it when to dispense the next label. When device is not present Label Dispenser functions like normal. Factory Installed Option.

10� wide �Quick-Chuck� Shaft, with 2 Label Flanges. Core Diameter – 3� Label Width – 10.6� (270-mm) Roll Diameter – 8.6� (220-mm)

6� wide Standard Rewind Shaft with 2 Label Flanges. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

8.6″ wide”Quick-Chuck” and two Label Flanges.* Core Dia. – 3″ Label Width – Up to 8.6″ (220 mm) Roll Dia. – Up to 12″ (305 mm)

Optional Large Label Roll Extender takes an 8.5� roll diameter to a 12� roll diameter in seconds. Easy to install and comes with all hardware needed to make the upgrade. Not available on any LD-200 model or -SS Stainless Steel models.

6� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 4� Label Width – 6.7� (170-mm) Roll Diameter – 8.6� (220-mm)

6� wide �Quick-Chuck� Rewind Shaft with 2 Label Flanges. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 12� (305-mm)

8.6″ wide”Quick-Chuck” and two Label Flanges. Includes the High-Torque Option. (see below)* Core Dia. – 3″ Label Width – Up to 8.6″ (220 mm) Roll Dia. – Up to 16″ (400 mm)

1� Core 8.6� Diameter, Aluminum Separator Plate.

Optional Label Dispenser Counter provides an accurate count of labels that have been dispensed. Factory Installed Option. Not available on the LD-100-S model or the -SS Stainless Steel models.

8.6� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 4� Label Width – 8.6� (220-mm) Roll Diameter – 8.6� (220-mm)

6� wide �Quick-Chuck� Rewind Shaft with 2 Label Flanges and 16� Roll Diameter. Core Diameter – 3� Label Width – 6� (152-mm) Roll Diameter – 16� (400-mm)

10″ wide Fin Style Core Holder and two Label Flanges. Core Dia. – 3″ Label Width – Up to 10″ (254 mm) Roll Dia. – Up to 12″ (305 mm)

6� wide Non-Powered Label Unwinder with 16� roll capacity and Inner Label Flange. Core Diameter – 3� �Quick-Chuck� Label Width – Up to 6� (152-mm) Roll Diameter – Up to 16� (400-mm)

1.5� Core 8.6� Diameter, Aluminum Separator Plate.

Optional Label Flanges provide tension on the label supply roll for easier peeling of labels from their backing material. Ideal option for hard to peel and super sticky labels. Sold in sets of 2.

10� wide �Quick-Chuck� Shaft, with Inner Flange. Core Diameter – 4� Label Width – 10.6� (270-mm) Roll Diameter – 8.6� (220-mm)

8.6� wide �Quick-Chuck� rewind Shaft with 2 Label Flanges. Core Diameter – 3� Label Width – 8.6� (220-mm) Roll Diameter – 12� (305-mm)

10″ wide”Quick-Chuck” and two Label Flanges.* Core Dia. – 3″ Label Width – Up to 10″ (254 mm) Roll Dia. – Up to 12″ (305 mm)

40mm Core 8.6� Diameter, Aluminum Separator Plate.

6� wide Non-Powered Standard Shaft Label Unwinder with 16� roll capacity and Inner Label Flange. Core Diameter – 3� Label Width – Up to 6� (152-mm) Roll Diameter – Up to 16� (400-mm)

6.5� wide Transparent Label Sensor Label Dispenser. Peel and Present operation allows for easy manual removal of label. Label Width – 6.5� (165-mm) Roll Diameter – 8.6� (220-mm)

LTO-TC2

Optional Low Torque Adjustment. For fragile material and delicate labels.

← Previous Entries

LabelMate

New Releases